Kunshan Tiancheng Electrical Engineering Co., Ltd.
Main products:rolling door motor,ac/dc motor,sliding door motor,high speed garage motor,rolling door
Products
Contact Us
  • Contact Person : Ms. Lee lillion
  • Company Name : Kunshan Tiancheng Electrical Engineering Co., Ltd.
  • Tel : 0086-512-57451616
  • Fax : 0086-512-57451615
  • Address : Jiangsu,kunshan,No.1 kunzhen road ,zhangpu town,kunshan city
  • Country/Region : China
  • Zip : 215321

Rolling Door Operator

Rolling Door Operator
Product Detailed
1.Good design,advanced structure strong power. 2.Easy installion,long serive life 3.low noice ,small power wastage      

  

Kunshan Tian Cheng electrical engineering Co; Ltd.

Specification and parameter of rolling door motors

Model

TCA-1500

TCA-1000

TCA-800

TCA-600

Voltage

380V

220V

220V

220V

Frequency

50Hz

50Hz

50Hz

50Hz

Currenct

2.8A

3.5A

3.0A

2.5A

Power

800W

780W

400W

370W

Lift capacity

1500Kg

1000Kg

800Kg

600Kg

Chain

16A

12A

10A

10A

 1.  Using high-performance motors  

    Motors was installed sensors of the protection device,when the motor temperature is over 100 degree,it automatically cut off power,it immediate supply to the cessation of operation of motor,when temperature down to 70 degree.the motor will automatically recover operation.To protect motor is not to be burned,high-safe. running lower than usual,smooth running with static and stability,Generating  vibration frequency voice was relatively lower.In small and light,construction convenient,saving artificial.      

2.       strict quality control  

reducer device use 2paragraph spiral gear,All special steel gear are used ,then through heat treatment and testing hardness of gear at any time,before out of factory,each motor are through electric integrated test bed,strict inspection to comply with the first-class products and standards with the requirements of national .        

3.      original patent braking systems  

exclusive double-sided braking systems design, double braking force can be produced .in the brake apparatus with a special high-coil Block respectively were put on activities brakes,    brakes, fixed brake pads, and the U-shaped ring. At the end of spring withstood brake   activities around the surface of activities brake, and the brakes could be sliding along the axis of the motors, not because of brake pads wear affect braking force.  

4.      a manual switch devices          

power-cut or emergency, the light drop pull rod, roll door dropped to required location of door  smoothly and automatically.       

Rolling Door Operator

Other products


Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.